Grass Valley LVS 100 v.3.15 - Manual (Page 41)

Profile LVS Event Management System Instruction Manual
1-9
Recording Modes
The LVS provides the three recording modes, described here. These modes are
available both in the LVS 100 Basic Feature Set and the Full Feature Set.
H 2-Channel Mode
H 1-Channel Mode
H VTR Emulation Mode
2-Channel Mode
Two channel mode allows you to play and record simultaneously. This requires
two Profile codec resources: one resource for record and the other for play.
While the record channel continues to record, you can create a scene by marking
the IN and OUT points with MARK and ENTER/CUE UP, or with just
ENTER/CUE UP. The marked scene can be replayed through the play channel
immediately after the scene has been created. See Figure 1–5 for an example.
The recording continues even during a slow–motion replay. To utilize disk
storage efficiently, Manual or Auto clean can be used to free disk space not
marked for replay.
Record
Channel
Play
Channel
REC MARK ENTER/CUEĂUP ENTER/CUEĂUP RECĂSTOP
PLAY/VAR/SHUTTLE PLAY/VAR/SHUTTLE
Recording Scene
Playing Scene Playing Scene
Figure 1-5: Simultaneous Record/Play Example
In the continuous record mode, all recorded material is available for replay
whether or not marked as scenes. New scenes can be identified from the recorded
material at any time.
Features