Grass Valley LVS 100 v.3.15 - Manual (Page 108)

System Configuration and Startup
3-18
Profile LVS Event Management System Instruction Manual
This function allows you to keep a scene cued up for playback while continuing
to mark new scenes.
Mute on VAR mode 
Check this when the audio is not desired in a slow motion
replay. To search for a frame by using the audio, remove the checkmark in this
box.
Max Shuttle Speed 
Sets the maximum shuttle speed of the Live Controller. Set
the maximum speed to one which is appropriate for your operation, keeping in
mind the typical duration of your events.
The effective range is between
1 and 50. The default value is 30.
Preview Channel 
Assign a channel which is automatically used whenver
preveiw operations are requested. This saves time by not requiring you to select
a preview channel for each operation. It also prevents inadvertent selection of
channels which are being used for other purposes. The preview channel is also
used with highlights and libraries. Select the desired channel from the Preview
Channel drop–down list box.
These buttons are used to save and load configuration settings.
When you click on the Save or Load button, the corresponding Save or Load
Configuration File dialog box appears, as shown in Figure 3–7 and 3–8.
In the Save Configuration File dialog box, all the information set in the
Configuration Window can be saved as a file on the Profile system hard disk, or
on a floppy disk.
Previously saved system settings can be loaded with the Load Configuration File
dialog box. When loaded, all current setup parameters are replaced with the
newly loaded information, ranging from Resource Setup data to various
parameter values (including window layout information).
To save a configuration setting, select a drive and a directory. Enter a file name
in the File name text box, then click the Save button.
Save and Load