Grass Valley LVS 100 v.3.15 - Manual (Page 66)

Tutorial
2-10
Profile LVS Event Management System Instruction Manual
7. Use this tab to set various operational parameters.
a. Click Other to open the tab (see Figure 2–9).
Figure 2-9: Other Tab  Configuration Window
b. In the Other tab, set the values related to the scene itself and related to
playing that scene. Initial values are preset, but you may change these
values to suit your purpose.
In this example, the default values are used without making any changes.
For an explanation of these settings, refer to Other Tab on page 3–13.
The configuration setup is now complete. Saving a configuration or recalling a
previous one (before clicking the OK button) is done with the Save or Load
buttons, which are described on the following pages.
Other