Grass Valley LVS 100 v.3.15 - Manual (Page 239)

Scene Information Window
Profile LVS Event Management System Instruction Manual
5-27
Level 
Signal level at the end of the fade out. This value must be given as a
percentage of the recorded level.
Refer to Fade In / Fade Out on page 4–66 for more details about fade-in and
fade-out.
Refer to Notes on Changing Event Information on page 5–25 for more details
about editing these values.
Slip 
Audio frames to be slipped from the video. This value changes the
relative position between audio and video.
Click on this button to make the changes effective.
If you click on an another icon before clicking on this button, the changes will be
discarded.
This button allows you to edit the duration of the recorded material. Click on this
button to display following buttons and text boxes. See Figure 5–14.
Real Time / Relative Time Button 
Use this button to toggle the type of timecode
you enter in the Adjust In and Adjust Out text boxes. When the button is
labeled Real Time, you can enter absolute timecode values in the text boxes.
When the button is labeled Relative Time, you can enter offsets to the current IN
and OUT points.
Adjust In 
Timecode at the IN point.
Adjust Out 
Timecode at the OUT point.
Change Button
Adjust Button