Grass Valley LVS 100 v.3.15 - Manual (Page 91)

Profile LVS Event Management System Instruction Manual
3-1
System Configuration and Startup
This subsection describes setup and startup of the system, which are required
prior to beginning operation. System setup is required to configure the Profile
resources. The functions and operational instructions for the Configuration
Window are described in this section.
System configuration must be performed in the following order.
1. Starting the system.
2. Configuration the system, including:
a. Allocating resources.
b. Assigning RS-422 ports and audio banks, and setting compression target
rates.
c. Assigning input and output channels to resources.
d. Assigning timecode channels to resources.
Additional optional configuration settings include:
e. Setting various parameters necessary for system operation.
f. Saving or recalling configuration settings.
3. Starting system operation.
For the Live Controller functions and the windows related to system operation,
refer to Live Controller starting on page 6–1 and Operating the System starting
on page 4–1
.