Grass Valley LVS 100 v.3.15 - Manual (Page 254)

Live Controller
6-10
Profile LVS Event Management System Instruction Manual
Using the SEARCH area buttons, you can search for a scene, event, or highlight.
Figure 6-8: Buttons in SEARCH Area
TIME 
Specifies the search is to be by timecode and requires the entry of a
valid timecode value. When this mode is active, the TIME button is lit.
A numeric value is entered as hours, minutes, seconds and frames. For example,
entry of 4–0–0–0–0–0 means 00 hours, 40 minutes, 00 second, 00 frame, and
entry of 2–3–4–0–0–0–0 means 02 hours, 34 minutes, 00 second, 00 frame.
SCENE 
Specifies the search is to be by scene number and requires the entry of
a valid scene number. When this mode is active, the SCENE button is lit.
HIGH LIGHT 
Specifies the search is to be by highlight number and requires
entry of a valid highlight number. When this mode is active, the HIGHLIGHT
button is lit.
EVENT 
Specifies the search is to be by event number and requires entry of a
valid event number. When this mode is active, the EVENT button is lit.
0 t o 9 
Numeric keypad for data entry.
If a numeric entry is incorrect, press the selected mode button again. For
example in the TIME mode, press the TIME button again. The value is cleared.
SEARCH Area