Grass Valley LVS 100 v.3.15 - Manual (Page 219)

Current Resource Information Window
Profile LVS Event Management System Instruction Manual
5-7
Assigning Controllers
1. In the Resource Setup tab of the Configuration window, select the RS-422
resource check box if this port is connected to a device other than the Live
Controller. Clear it if the port is connected to the Live Controller.
Note that this step is performed when you configure the system. You cannot
change this setting dynamically.
2. Select the desired GUI, Controller, or Remote options in the Current
Resource Information window. The Profile system will accept commands
from all of the selected controllers for the specified resource.
The setting takes effect immediately.
In the Current Resource Information window, you can change the controller
assignments dynamically while the LVS software is running.
Window Description
Group display indicates the resource group channel assigned in the Resource
Assign page of the Configuration window (refer to page 3–5).
GUI 
Select this option to control the group resources from the GUI (LVS
application windows). Clear this option to disable control the specified group
resources from the GUI.
Controller 
Select this option to control the group resources from the Live
Controller. Clear this option to disable control the specified group resources from
the Live Controller.
The list below the Controller option displays the RS-422 port numbers to which
the Live Controllers are connected. The list is derived from your settings in the
Resource Setup tab of the Configuration window. Refer to page 3–8.
Remote 
Select this option to control the group resources from a device other
than the Live Controller. Clear this option to disable control the specified group
resources from a device other than the Live Controller.
The list below the Controller option displays the RS-422 port numbers to which
the Live Controllers are connected. The list is derived from your settings in the
Resource Setup tab of the Configuration window. Refer to page 3–8.
Groups
Resource Controller
Options