Grass Valley LVS 100 v.3.15 - Manual (Page 51)

Installation
Profile LVS Event Management System Instruction Manual
1-19
Start and Shut Down the LVS System
For starting and shutting down the LVS system, refer to System Start-up section
on page 2–2 and System Shutdown on page 2–32, respectively.
Shutdown and Power Off
To shut down Windows NT and turn off the Profile system, perform the
following steps.
1. Select the Shutdown from the Windows NT 4.0 Start menu , or select
Shutdown from the File menu in the Windows NT 3.51 File Manager.
2. Check the Shutdown in the Shutdown Computer dialog box.
3. When a message similar to Now you can safely turn off the power appears,
you can turn off the power for the Profile system, the monitor, and the Live
Controller.