Who should use this manual, What is the 1336 impact drive, Purpose of this manual – Rockwell Automation 1336E IMPACT Adjustable Frequency AC Drive User Manual V 1-4.XX User Manual
Page 7: Preface

Preface
Preface
Read this preface to become familiar with the rest of the manual. This
preface covers the following topics:
•
who should use this manual
•
an overview of the 1336 IMPACT drive
•
the purpose of this manual
•
terms and abbreviations
•
conventions used in this manual
•
Allen-Bradley support
Who Should Use this Manual?
Use this manual if you are responsible for installing, wiring, starting,
programming, or troubleshooting control systems that use the 1336
IMPACT drive.
This manual is intended for qualified service personnel responsible
for setting up and servicing the 1336 IMPACT AC drive. You must
have previous experience with and a basic understanding of electrical
terminology, programming procedures, required equipment, and
safety precautions before attempting to service the 1336 IMPACT
drive.
What Is the 1336 IMPACT
Drive?
The 1336 IMPACT drive is a high performance,
microprocessor-based Field Oriented Control (FOC) AC drive that
uses Force technologies™. The 1336 IMPACT drive was designed to
be a low cost drive for standalone applications. The drive is user
friendly and has an easy to use start up sequence for simple, out of the
box installation.
Purpose of this Manual
This manual is a learning and reference guide for the 1336 IMPACT
drive. It describes the procedures needed to install, program, start, and
maintain the 1336 IMPACT AC drive. Before you operate, service, or
initialize the 1336 IMPACT drive, you should, at a minimum read the
first 6 chapters of this manual.