202 func 2 mask/val, 203 func 2 eval sel – Rockwell Automation 1336E IMPACT Adjustable Frequency AC Drive User Manual V 1-4.XX User Manual
Page 261

Parameters
11-63
202
Func 2 Mask/Val
Use Func 2 Mask/Val to enter a mask or value to compare
Function In2 (parameter 201) to, according to the value you
select in Func 2 Eval Sel (parameter 203).
1 Func 2 Mask/Val was added in Version 2.xx.
Parameter number
File:group
Application:Prog Function
Parameter type
linkable destination
Conversion
1 = 1
If Func 2 Eval Sel (parameter 203) is 0 or 6 – 11, then:
Display
±x
Factory default
-1
Minimum value
-32767
Maximum value
+32767
If Func 2 Eval Sel (parameter 203) is 1 – 5, then:
Display
bits
Factory default
11111111.11111111
Minimum value
00000000.00000000
Maximum value
11111111.11111111
If Func 2 Eval Sel (parameter 203) is 12 – 15, then:
Display
x
Factory default
65535
Minimum value
0
Maximum value
65535
Refer to Chapter 10, Using the Function Block, for more
information.
203
Func 2 Eval Sel
Func 2 Eval Sel lets you choose how you want to evaluate
Function In2 (parameter 201).
1 Func 2 Eval Sel was added in Version 2.xx.
Parameter number
File:group
Application:Prog Function
Parameter type
destination
Display
x
Factory default
0
Minimum value
0
Maximum value
17
Conversion
1 = 1
Refer to Chapter 10, Using the Function Block, for more
information.
Value
Description
0
None
Pass the value directly on to the
function block.
1
Mask
Mask specific bits.
2
All Bits On
Check to make sure that all bits
that are set (on) in Func 2
Mask/Val (parameter 202) are set
in Function In2 (parameter 201).
3
All Bits Off
Check to make sure that all bits
that are set in Func 2 Mask/Val are
clear in Function In2.
4
Any Bit On
Check to make sure that at least
one of the bits that are set in
Func 2 Mask/Val is set in Function
In2.
5
Any Bit Off
Check to make sure that at least
one of the bits that are set in
Func 2 Mask/Val is clear in
Function In2.
Value
Description
6
I=V
Check to see if Function In2 is
equal to Func 2 Mask/Val.
7
I Not = V
Check to see if Function In2 is not
equal to Func 2 Mask/Val.
8
Signed I
Function In2 is less than the value
of Func 2 Mask/Val.
9
Signed I<=V
Check to see if the signed value of
Function In2 is less than or equal
to the value of Func 2 Mask/Val.
10
Signed I>V
Check to see if the signed value of
Function In2 is greater than the
value of Func 2 Mask/Val.
11
Signed I>=V
Check to see if the signed value of
Function In2 is greater than or
equal to the value of Func 2
Mask/Val.
Value
Description
12
Unsign I
of Function In2 is less than the
value of Func 2 Mask/Val.
13
Unsign I<=V
Check to see if the unsigned value
of Function In2 is less than or
equal to the value of Func 2
Mask/Val.
14
Unsign I>V
Check to see if the unsigned value
of Function In2 is greater than the
value of Func 2 Mask/Val.
15
Unsign I>=V
Check to see if the unsigned value
of Function In2 is greater than or
equal to the value of Func 2
Mask/Val.
16
Invert
Pass the opposite value on to the
function block
17
Absolute
Pass a positive value on to the
function block.