Rockwell Automation 1336E IMPACT Adjustable Frequency AC Drive User Manual V 1-4.XX User Manual
Page 14

1-2
Overview
•
S-Curve
•
autostart (auto restart, power up start)
•
start and stop dwells
•
analog input filters
•
process trim
•
fast flux up
•
2/3 wire control
•
feedback filters (light, heavy, lead/lag, and notch)
•
Flying Start
Options
The 1336 IMPACT drive provides the following options:
•
DriveTools
, which is PC Windows based programming
software compatible with the 1336 IMPACT drive and also other
Allen-Bradley 1336 and 1395 products
•
dynamic braking
•
AC motor contactor
•
L Option board with or without an encoder interface
•
Human Interface Module (HIM)
•
Graphics Programming Terminal (GPT)
•
gateway modules (Bulletin 1203 communications modules)
Protective Features
The 1336 IMPACT drive uses the following protective measures:
•
programmable motor overload protection (I
2
T) investigated by
UL to comply with NEC Article 430
•
inverter overload protection (IT)
•
overspeed detection, even when operating as a torque follower
•
programmable stall detection
•
peak output current monitoring to protect against excessive
current at the output due to a phase-to-ground or phase-to-phase
short
•
ground fault monitoring
•
DC bus voltage monitoring to protect against undervoltage or
overvoltage conditions
•
power structure heatsink temperature monitoring
•
motor overspeed
•
internal voltage reflection reduction mechanism