Lenze ETC Motion Control - Manual (Page 96)

CNC programming
G functions
G functions individual descriptions
3
3.2
3.2.2
l
96 EDSTCXN EN 2.0
X
Y
Startpunkt
N50
N60
X
Y
Startpunkt
N50
N60
N10 G90 Change over to the reference
dimension system and traverse
the X axis to the position
+20 mm and the Z axis to the
position +200 mm.
N20 G0 X20 Z200
N50 G0 X10 Y10 Select modal G function and
approach the starting position.
N60 Y30 R10 The blocks N60 and N70 are
connected with a tangential arc
with a radius of 10 mm instead
of with a 90
°
angle.
N70 X30
Example