Lenze ETC Motion Control - Manual (Page 304)

ETC−MMI
"Programming" operating mode
7
7.6
l
304 EDSTCXN EN 2.0
Stop Quits a running program.
Insert cycle Adds a prepared cycle. The cycle is selected by means of
the keys and added to the line where the
cursor is positioned by means of . cancels
the selection.
A cycle is a subprogram to which parameters are
transferred when it is called. More detailed information
on creating cycles can be found later in this chapter
(
^ 310.).
Edit cycle Edit existing cycle. The cursor must be positioned on the
line in which the cycle is called.
Delete cycle Delete a cycle call at the current cursor position.
File manager The exact description of the file manager including the
meaning of the softkeys used can be found later in this
chapter (
^ 308.).
Rotate by X, Y, Z Rotate the representation of the profile in X, Y and Z
direction (via <+>and <−>) keys.
Move by X, Y Shift the representation of the profile in X and Y
direction (via <+>and <−>) keys.
Split screen Change the size of the graphic window (via <+> and <−>)
keys.
Zoom Change display size of the graphic (via <+> and <−>)
keys.
Vertical function keys
Vertical function keys for
graphics "on"