Cnc programming – Lenze ETC Motion Control User Manual
Page 187
CNC programming
Data fields
P field
3.5
3.5.1
l
187
EDSTCXN EN 2.0
Index
Meaning
Sync
Unit
377
Total runtime since the start of the NC program
x
GIT
378
Total of the travel times since the start of the NC
program
x
GIT
379
Total of waiting times for M functions since start of the
NC program
x
GIT
380
Time since the control was switched on
x
s
381
Time since the control was switched on
x
min
382
Time since the control was switched on
x
h
389
Total of the dwell times since the start of the NC
program
x
ms
390
Total runtime since the start of the NC program
x
ms
391
Total of the travel times since the start of the NC
program
x
ms
392
Total of waiting times for M functions since start of the
NC program
x
ms
393
Total of the waiting times by Q−Tab and V−Tab
comparisons since the start of the NC program
x
ms
The parameters in the range between P1024 and P1099 are provided for
technology−specific functions and only of importance for the respective
technology. For all of the technologies not listed here, parameters P1024 ...
P1099 are available to the user.
Index
Meaning
Sync
Unit
1024
Overcut length
mm *
1025
Cutter length
mm *
1026
Total cutter abrasion
mm *
1027
Minimum length of an empty run for lifting the
holding−down device
mm *
1028
Copy from MK_KONTURWINKEL2
°
1030
Advance−before plunge
mm *
1032
Min. cutter oscillation speed (G97: spindle type 2)
1/min
1033
Path speed for min. cutter oscillation
mm/min *
1034
Max. cutter oscillation speed
1/min
1035
Path speed for max. cutter oscillation
mm/min *
1036
Path distance window as a cutter criterion for the cutter
grinding for the customer−specific comparison
operation type 0 (G130 V0)
mm *
Index
Meaning
Sync
Unit
1040
Dwell time for non−tangential (not equal to 180
°
)
profile transitions
s
1041
Preliminary position of the resistance wire in X
mm *
1042
Max. reached position of the X axis before the standstill
of X
mm *
1043
Default position of the X−axis, at which the resistance
wire is switched on
mm *
Parameter for time recording
Technology−specific user
parameters
Material cutting
Polystyrene cutter