Lenze ETC Motion Control - Manual (Page 61)

Getting started
Creating a PLC sample program
Starting and configuring the PLC sample program
2
2.12
2.12.2
l
61 EDSTCXN EN 2.0
2.12.2 Starting and configuring the PLC sample program
The sample program "Training1" contains
ƒ all settings of the control system,
ƒ the parameterisation,
ƒ the calls for adding the required PLC functions for the M−functions to
the described CNC program.
1. In Windows File Explorer, double−click on the file "Training1.pro".
CoDeSys starts and the sample program is loaded. It consists of a
sequence control (AS) with the steps "Init" and "Main".
ETCN028
Start sample program