Lenze ETC Motion Control - Manual (Page 22)

Getting started
Establishing the communication between PC and ETCHx
Starting the terminal program "HyperTerminal" and activating the monitor interface
2
2.4
2.4.2
l
22 EDSTCXN EN 2.0
3. In the "Connect to" dialogue, select the PC interface via which you want
to establish the connection (for example "COM1").
ETCM006
4. Click OK.
5. In the "COMx Properties " dialogue, enter the following data:
ETCM007
6. Click OK.
ETCM008