Etc−mmi – Lenze ETC Motion Control User Manual
Page 287
ETC−MMI
Installing ETC−MMI
7.1
l
287
EDSTCXN EN 2.0
After a standard installation, the following files and file paths can be found
on the hard disk of the PC after a successful installation:
e.g. c:\Programs\Lenze\ETC\MMI\)
Lenze.exe
ETC−MMI application
ncform.hlp
Help file
install.hlp
Installation instructions
...\cfg\
Configuration directory
muster.mk
Machine constant file with basic settings
mk.hlp
ASCII file, containing help information on setting the
machine constants ("edit MC")
mmi_fehl.db
ASCII file containing error messages of the MMI
ncr_fehl.db
ASCII file containing error messages of the NC
Lenze.txt
ASCII file with general texts, notes, error messages,
information on inputs/outputs and function keys. The file is
required by the user interface.
sps_fehl.db
ASCII file containing error messages of the PLC
delphmmi.ini
Initialisation or configuration file for ETC−MMI
...\bin\
etc*.rsc
ETCHC or ETCPC firmware
spsdummy.prg
Example of a PLC program
...\prg\
DIN file index
nikolaus.din
Example of a DIN file (profile)
...\log\
Folder for all temporary files which are loaded back from
the control system
e.g. c:\Windows\Systems32
mmigrp32.dll
MMI−DLL
mmigtway.exe
Gateway program
mmictr.dll
Interface for the application
ipcom.dll
DLL with internal gateway functions
gtwconf.exe
Configuration interface
mmigtwayini
Configuration file
^ 283
Installed files