3 configuring the etc-mmi gateway, 1 connection - setting up connections, Configuring the etc−mmi gateway – Lenze ETC Motion Control User Manual

Page 278: Connection − setting up connections, Etc−mmi−gateway

Text mode
Original mode

ETC−MMI−Gateway

Configuring the ETC−MMI gateway
Connection − Setting up connections

6.3
6.3.1

278

EDSTCXN EN 2.0

6.3

Configuring the ETC−MMI gateway

Via the configuration interface of the ETC−MMI gateway, you can configure
the connections to the control systems and call debug information.

The configuration interface is a separate application (gtwconf.exe), which is
installed with the ETC−MMI gateway. It can be started via the gateway menu
(

¶ 277) or as Windows application, e.g. via Windows File Explorer.

6.3.1

Connection − Setting up connections

The "Connections" tab shows the list of the configured connections.

ETCN003

A green LED next to the connection name indicates an active connection, via
which the messages and/or cyclic data are transferred.