Lenze ETC Motion Control - Manual (Page 191)

Machine constants
Basics
4
4.1
l
191 EDSTCXN EN 2.0
The exact name of the MCs must be entered, otherwise the NC computer will
not recognize it. During the transfer of the MCs, the ETC issues an error
message for each MC it does not recognize. From the moment the transfer
has been completed without errors, the MCs are valid in the machine. In
general, it is always possible to transfer the MCs. However, MCs that affect
the storage distribution within the control only become effective after the
control has been restarted again. All of the other MCs become effective
immediately after the transfer or at the latest when the control is ready to
execute a program.
The MCs can be divided in specific interrelated fields. However, the order is
optional.