Lenze ETC Motion Control - Manual (Page 71)

Getting started
Creating a PLC sample program
Loading the PLC sample program into the control system
2
2.12
2.12.3
l
71 EDSTCXN EN 2.0
1. Select Online W Log in.
The program is loaded into the control system.
2. Select Online W Start.
The program starts. After a successful start, the "RUNNING" field in the
status line changes its colour from grey to black.
ETCM042
The status line shows the current connection (in this case: "local_"). In the
right part of the window, the program displays the current values of the
variables.
ETCNC097
After you have logged in to the control system via Online W Log in, the
following functions can be used:
ƒ Stop program: Online W Stop
ƒ Reset data memory to starting values: Online W Reset
ƒ Create boot project: Online W Create boot project
The program is saved as "default.prg" in the flash of the control system.
When the control system is started, it looks for a program "default.prg".
This program is automatically started as boot project.
ƒ Delete boot project: Online W Reset
ƒ Stop communication with the control system: Online W Log out
The program in the control system remains in the status that was
selected last.
Load and start program
Operate program