ETC Unison Mosaic Designer v1.11.0 - Manual (Page 73)

Program - Preset types & properties
l
Colour - specifies the flash colour
l
Period - the interval in seconds between the start of each flash
l
Duration - the length in seconds of the flash
Sparkle
Renders a dynamic random sparkle effect:
l
Base Colour - the colour of the background
l
Spark Colour - the colour of the spark
l
Transparency - select Opaque for none, Base or Spark Transparent to superimpose the effect onto other
programming
l
Period - the rate of the effect (larger numbers are slower)
l
Density - the density of the effect in percent (higher numbers, more sparks)
Colour chase
Renders a dynamic chase through a user-specified sequence of colours:
l
Colours - pressing the colour buttons will prompt for a new colour for that step
l
Steps - the number of steps in the sequence
l
Direction - choose Forwards, Backwards or Bounce (the latter uses two periods to complete)
l
Period - the number of seconds that the sequence takes to complete
l
Count - the number of times that the sequence should complete over the length of the preset
l
Offset Style - choose None (all elements are the same colour) or Spread (the sequence is spread over
space as well as time)
l
Repeat - the number of elements to repeat the chase over
l
Buddy - the number of elements that will be set to the same step (if Buddy is greater than 1, the number of
elements that are repeated over is Repeat multiplied by Buddy)
l
Fade - the fade time in seconds between each colour in the sequence
l
Hold - the time that each colour in the sequence is not fading
Colour on colour
Renders a dynamic pulse of colour passing over another colour:
l
Base Colour - the base colour
l
Top colour - the colour of the pulse
l
Transparency - select Opaque for none, Base or Top Transparent to superimpose the effect onto other pro-
gramming
l
Period - the number of seconds that the sequence takes to complete
l
Count - the number of times that the sequence should complete over the length of the preset
l
Repeat - the number of elements to repeat the pulse over
l
Buddy - the number of elements that will be set to the same colour in the pulse (if Buddy is greater than 1,
the number of elements that are repeated over is Repeat multiplied by Buddy)
l
Shape - the shape of the pulse (Sine, Triangle, Square, Ramp Up or Ramp Down)
l
Pulse Width - the width of the pulse in percent (1 > 200%, if 100%, the pulse is half of the element width)
l
Phase - the offset of the pulse in degrees
l
Reverse Direction - reverses the direction of the pulse
l
Invert Pulse - changes the starting position of the pulse
- 73 -