ETC Unison Mosaic Designer v1.11.0 - Manual (Page 175)

Web interface - Command line
1-25@100%r255b255g0
Set fixtures 1 thru 25 to 100% intensity, red to 255, blue to 255 and green to 0
immediately
Clearing fixture settings
xc[ty]
where x is the fixture number and y is an optional time in seconds.
Examples:
1c Clear settings for fixture 1 immediately
5ct6.5 Clear settings for fixture 5 fading over 6.5 seconds
Clearing all fixtures settings
ca[tx]
where x is an optional time in seconds.
Examples:
ca Clear settings for all fixtures immediately
cat10 Clear settings for all fixtures fading over 10 seconds
Multiple Commands
Multiple commands can be applied from a single command line if separated by commas.
Examples:
1@100%,1r0,1b0,1g255 Set intensity of fixture 1 to 100%, red and blue to 0 and green to 255
1ct5,4r255,4@75%t5
Clear settings for fixture 1 fading over 5 seconds, set red for fixture 4 to 255
immediately and then set intensity of fixture 4 to 75% fading over 5 seconds
Interaction with timeline playback
Settings applied from the command line are applied as if from a high priority timeline, so they will override all nor-
mal timeline programming until cleared. Fades to and from command line settings behave just like fades between
timelines.
- 175 -