ETC Unison Mosaic Designer v1.11.0 - Manual (Page 51)

Patch
To clone a universe (copy the patch):
1. Use Controller and Universe to select the universe to be cloned
2. Press the Clone Universe button to open the Clone Patch dialog:
3. Select the target Controller, Protocol and Universe using the pull-down
4. Press Ok to clone the patch to this universe or Cancel to abort
To highlight a fixture:
1. Select one or more fixtures using the Browser or the universe layout
2. Press the Highlight button, the fixture(s) will come on to their highlight defaults (typically open white)
3. Press Highlight again to turn off or select other fixtures to highlight
NOTE: The appropriate Controller must be on the network and correctly associated to highlight fixtures. Fixtures
can also be highlighted from the plan in Setup.
To hide unused universes:
1. Select the Controller
2. Press the Hide Unused Universes button, only universes with patched fixtures will be displayed
3. Press Hide Unused Universes again to display all or select another Controller
RDM device discovery
- 51 -