Disable tpc, Lock tpc, Set screen brightness – ETC Unison Mosaic Designer v1.11.0 User Manual
Page 117
Triggers - TPC triggers
Disable TPC
The entire user interface of a TPC can be enabled or disabled. Set the Controller number to the target TPC, then
choose whether to enable or disable the user interface.
Lock TPC
If TPC security has been setup in Touch Editor then this action can be used to show the lock screen on the target
TPC. The user must enter the correct code on the keypad in order to unlock the TPC.
Set the Controller number to the target TPC, then choose whether to lock or unlock the user interface.
Set Screen Brightness
The brightness of the backlight of a TPC may be set using this action. Set the Controller number to the target
TPC, then set the value as a percentage, or elect to set this from a variable.
NOTE: the brightness of the TPC screen can be set automatically in response to changes in ambient light - see
.
- 117 -