Control, Command line, Triggers – ETC Unison Mosaic Designer v1.11.0 User Manual
Page 172: Dynamic text slots, Configuration
Unison Mosaic Designer User Manual
Control
Password protected if
. Enter "admin" for the User Name and then the password.
A Controller can be controlled remotely in two ways:
Command line
An advanced feature that allows direct control of a specific Controller's fixtures, timelines and even DMX chan-
nels via the
engine, see
reference.
Triggers
All the triggers in the project, together with user annotation, are listed here and can be fired by clicking on them.
Since a network of multiple Controllers share triggers, firing triggers from one Controller's web interface will trig-
ger all the Controllers in the project.
Triggers on the default Control web page will not test conditions, create a
if condition testing is
required.
Dynamic text slots
All the Dynamic text slots are listed with their current value. You can edit any text slot and changes will take
effect according to the preset settings on the timeline (immediately, next cycle, on timeline restart).
Configuration
Password protected if
. Enter "admin" for the User Name and then the password.
- 172 -