ETC Unison Mosaic Designer v1.11.0 - Manual (Page 171)

Web interface - Default pages
Emergency Test Schedule
Only populated if the current interface has emergency ballasts present. View information about when Emergency
Ballast tests are due to take place as well as the time and date of previous tests. Also view the uptime of the
DALI bus.
Emergency Ballast Errors
Lists all reported errors reported by emergency fixtures on the current DALI interface. Errors will show ballast
address, tests failed and reported errors.
Once a ballast has been repaired it can be marked as fixed here or by using triggers . Once a ballast has been
marked as fixed it will remain in the Ballast Errors section until a subsequent test has confirmed that the fixture is
indeed operational again.
Ballast Status
Lists all ballasts and reported status on the current interface. Standard ballasts show the ballast Address, Name,
Status and Level; emergency ballasts also show Battery Charge, Emergency Lamp Hours and Total Lamp
Hours.
Recent Power Failures
Lists any reports of bus power failures for the current interface.
- 171 -