Default gateway, Managed switches and firewalls, Edmx considerations – ETC Unison Mosaic Designer v1.11.0 User Manual
Page 138: Network window
Unison Mosaic Designer User Manual
Default gateway
Must be consistently set to either nothing or a valid IP address.
Managed switches and firewalls
Managed Ethernet switches and your PC's Security Firewall can conspire to make life difficult - by blocking Mult-
icast addresses for example. ETC recommends the use of Unmanaged switches and disabling your PC's Fire-
wall if you're experiencing connection problems.
eDMX considerations
While the MSC X has a second, dedicated Ethernet Protocol port with its own IP settings, the TPC and MSC 1, 2
& 4 must share their single Ethernet port. However, this single Ethernet port can be configured with two IP
addresses, making it easier to manage routing of output protocol data. See
For further information about the Controller hardware and its input/output ports please refer to the Installation
Guide supplied with the unit or on the CD in PDF form.
Network window
Once you have connected the Controller, select the Network tab to view your connected Controllers & Remote
Devices:
- 138 -