ETC Unison Mosaic Designer v1.11.0 - Manual (Page 27)

Overview
incorporating conditions if necessary. See Trigger reference.
Simulate (F8)
Simulate allows you to view a representation of your project in plan format. You can play individual timelines to
check your programming then run the whole project including triggers. A set of buttons allow you to simulate
external triggers in order to test your programming properly. See
Simulate reference.
The Simulator can also be opened in its own window so that it is permanently available, typically on a second
monitor. Tear off (click and then drag to the right) the Simulate mode tab or press Ctrl (Apple) + F8 to open this
window.
Network (F9)
This is where you manage your Unison Mosaic hardware, assigning connected Controllers to the Controllers in
your project, configuring their input/output interfaces and any attached Expansion Modules or connected Remote
Devices. See
Network reference.
Report (F10)
Here you can view and organise spreadsheet-style reports listing the elements within the project for example fix-
ture schedule, patch, triggers. This is useful in providing documentation about the installation for future reference
and to aid maintenance. Reports can be exported as *.tsv files (Tab Separated Values) for importing into an Excel
spreadsheet for formatting and printing. See
Report reference.
- 27 -