ETC Unison Mosaic Designer v1.11.0 - Manual (Page 157)

Network - Controller Interfaces
See timeline properties for usage.
AUDIO
The Audio Expansion Module allows realtime manipulation of intensity and timeline playback to create "sound-to-
light" or "light organ" effects. The configuration options are:
l
Route To - select one of the four Audio Buses to which the audio should be routed.
l
Gain - adjust the module's input gain to suit the audio signal level.
l
Initially Enabled - uncheck to disable this port.
The Audio Feedback window is available from the View menu to monitor each Audio Bus:
The Audio Expansion Module provides five frequency bands at 63Hz, 250Hz, 1KHz, 3.5KHz and 12KHz.
The RIO A has superseded the Audio Expansion Module and offers vastly superior functionality. See remote
devices for more details.
See timeline properties and advanced triggers for usage and please contact support for tips and tricks as a sur-
prising variety of effects are available.
DALI-M
The DALI Master Expansion Module allows control of up to 64 DALI ballasts, with each module being mapped to
a DALI Interface, see
DALI . Since patch, ballast configuration, group and scene data is stored in the DALI bal-
lasts themselves it is beneficial to be connected to the ballasts when programming.
Use the Interface pull-down to select which DALI interface the Module is assigned to. Only one Module can be
assigned to each interface of which there can be up to 4, see
DALI for adding and removing DALI interfaces.
- 157 -