Apple Logic Pro 9 - Manual (Page 802)

The Record Enable buttons of all selected channel strips (typically, audio channel strips)
switch to the new mode.
Note: Only channel strips with different input sources can be record-enabled
simultaneously.
Adjusting Mixer Plug-in Settings
You can adjust some plug-in settings on several channel strips simultaneously.
To choose an effect or instrument for all selected channel strips
µ
Click an unused Insert or Instrument slot on any of the selected channel strips, and make
your choice from the list.
The selected effect or instrument will be inserted into the corresponding slot on all
selected channel strips, if their corresponding slots are empty. Existing plug-ins on other
channel strips are not changed.
To replace a plug-in for all selected channel strips
µ
Click a used Insert or Instrument slot on any of the selected channel strips, and make your
choice from the list.
The selected effect or instrument will be inserted into the corresponding slot on all
selected channel strips, even if their corresponding slots are empty.
To remove a plug-in for all selected channel strips
µ
Click a used Insert or Instrument slot on any of the selected channel strips, and choose
“No Plug-in” from the list.
The selected effect or instrument will be removed from all corresponding slots on all
selected channel strips.
To insert the Channel EQ for all selected channel strips
Do one of the following:
µ
On channel strips where Insert slot 1 is not used: Double-click the EQ area on the upper
portion of the channel strip to place the Channel EQ in the first Insert slot.
The Channel EQ will be inserted in the first empty slot of all selected channel strips.
µ
On channel strips where Insert slot 1 is used: Option-double-click the EQ area to insert
the Channel EQ as the first plug-in and move all existing plug-ins of the channel strip one
slot down.
The Channel EQ will be inserted into the first Insert slot of all selected channel strips,
moving any existing plug-ins one slot down.
Adjusting Mixer Routing, Automation, and Group Settings
You can adjust some routing, automation, and group settings on multiple channel strips
simultaneously.
802 Chapter 27 Mixing