Apple Logic Pro 9 - Manual (Page 790)

Open the View menu in the Mixer and choose MIDI Channel Strip Components, then
choose all of the items that appear in the submenu—Instrument Name, Program, Bank,
Assign 1 to 5—so you will be able to see all of the parameters described below. The basic
channel strip Level, Pan, and Mute controls are always shown on MIDI channel strips.
Program
Bank
Assign 1 to 5
• Bank fields: If your sound source “understands” bank select events, you can choose the
bank number for each of the MIDI channel strips. The lower value sends controller value
32, and the upper value sends controller value 0; this is for MIDI instruments that have
127 x 127 banks. You can use several different bank select formats (see
Custom Bank
Selects ) if your device does not use the standard controller 0/32 messages. Remember
that not all synthesizers support bank select events.
790 Chapter 27 Mixing