Apple Logic Pro 9 - Manual (Page 1233)

General MIDI Settings
The following parameters are available in the General pane.
Miscellaneous Settings
• Send After Loading Project: “Used instrument MIDI settings” checkbox: Sends the active
instrument MIDI settings automatically after loading a project. (See Inserting Program
Change, Volume, and Pan as MIDI Events .)
• Send After Loading Project: “All fader values” checkbox: Sends all Environment fader
values automatically, once a project is loaded.
• Scrubbing with Audio in Arrange checkbox: Activate this setting if you want to
simultaneously scrub MIDI and audio regions in the Arrange window.
MIDI Thru Settings
• SysEx with MIDI Thru Function checkbox: Incoming SysEx messages are passed through
the computer to the MIDI outputs, along with other MIDI data. This is particularly
important when using hardware programmers, as you can immediately monitor
parameter changes to the synthesizer you are editing.
If you want to record SysEx dumps, do not select this checkbox. It rarely makes sense
to divert dumps through the computer unless you want to record a dump and
simultaneously transmit it to a second device of the same type.
1233 Chapter 43 Project Settings in Logic Pro