Spectra Precision ProFlex 800 Reference Manual - Manual (Page 89)

75
Using the Web Server
you will see the detail of the selected data on the right of
this field, as defined in
Data Output > Differential Messages.
• In the Device field, select the type of the radio transmitter
the base is using (the internal or an external one).
Depending on the type of radio used, you will have to
provide the following parameters to complete the
configuration of the radio.
Note that the Load Transmitter Settings button is used to
read the current setting of the radio. The changes you
make to these settings will be effective in the radio only
after running the last step below.
By defining now the settings of the serial port used (A, B
or F), you will save time as you won’t need to go through
the
Connections>Serial Ports submenu to make these
settings.
U-Link TRx
Magellan
UHF
PDL HPB/
LPB
ARF7474B
EU
ARF7474A
NA
ADL Vantage/
Vantage Pro
ADL
Foundation
Port A, B, F A A, B, F A, B, F A, B, F A, B, F D
Baud Rate
1200, 2400,
4800, 9600,
19200,
38400 1200, 2400,
4800, 9600,
19200,
38400 1200, 2400,
4800, 9600,
19200,
38400 1200, 2400,
4800, 9600,
19200,
38400 1200, 2400,
4800, 9600,
19200,
38400
1200, 2400,
4800, 9600,
19200, 38400
NA
Mode
RS232,
RS422 RS232,
RS422 RS232,
RS422 RS232,
RS422 RS232,
RS422 RS232,
RS422
NA
Protocol
Transpar-
ent, DSNP
NA
Transpar-
ent, Trimtalk
NA NA
Transparent,
Trimtalk 450S,
SATEL, Trim-
MarkII/IIe,
TT450S,
TRIMMARK3,
Transparent
FST, U-Link Transparent,
Trimtalk 450S,
SATEL, Trim-
MarkII/IIe,
TT450S, TRIM-
MARK3, Trans-
parent FST, U-
Link
Channel 0-15 0-15 0-15 0-2 NA 1-32 1-32
Air Link
Speed 4800, 7600,
9600
NA
4800, 9600,
19200
NA NA
4800, 8000,
9600, 16000,
19200 4800, 8000,
9600, 16000,
19200
RTS/CTS NA NA On/Off On/Off On/Off On/Off -
Scrambler NA NA On/Off NA NA On/Off On/Off
FEC NA NA On/Off NA NA On/Off On/Off
Current
Power (W)
NA NA NA NA NA 0.1, 0.5, 1, 2, 4 0.1, 0.5, 1
Load
Transmit-
ter Settings
button
Yes Yes Yes Yes No Yes No