Spectra Precision ProFlex 800 Reference Manual - Manual (Page 215)

201
Web Server Help Files Collection
Upload File:
Receiver
Configuration
The Receiver Configuration page is used to save the receiver’s
current configuration as a *.PAR file. The syntax used to
name the file is .par where:
• PF is the header for the receiver model
• SSSSS stands for the last 5 digits from the receiver serial
number
• ddd is the current day number (1-366)
• hhmmss is the time of file creation
The Receiver Configuration page is also used to load a *PAR
file. By doing this, you will replace the currently used receiver
configuration with the one described in the loaded PAR file.
The PAR file may be loaded from the receiver’s internal
memory or USB device, or from the local computer running
the Web Server.
Execute button
Click on this button after having selected a
command file in the above table. As a
result, the receiver will run the list of
$PASH commands read from the selected
file. A report is then provided on the Result
web page.
CMD,LOD
Parameter Designation $PASHS
Command File
Use the Browse button attached to this
field to browse your computer’s hard disk
for the desired command file (a text file).
-
Send and Execute but-
ton
Click on this button after having selected a
command file in the above field.
As a result, the computer will upload the
file to the receiver which will in turn run the
list of $PASH commands read from this
file.
On completion of this sequence, a link to a
log file will be provided on the Result web
page so you can see by yourself how the
receiver executed the list of commands.
CMD,LOD
Parameter Designation $PASHS