Relevant query command, See also, Ecp,off: powering off ports b & f – Spectra Precision ProFlex 800 Reference Manual User Manual

Page 387: Function, Command format, Comments

373

Set Command Library

Relevant Query

Command

$PASHQ,DYN

See Also

$PASHS,UDP

ECP,OFF: Powering Off Ports B & F

Function

This command is used to power off communication ports B
and F.

Turning off ports B and F may be useful when the receiver is
operated from the internal battery. When ports B and F are
not used, turning them off will allow you to extend the battery
operating time.

Command Format

Syntax

$PASHS,ECP,OFF[*cc]

Parameters

None.

Example

Turning off ports B and F:

$PASHS,ECP,OFF*40

Comments

The command is NAKed if a second GNSS board or/and the
extended internal memory is/are used and currently on. See
$PASHS,HDB,ON/OFF and $PASHS,EXM,ON/OFF.

Relevant Query

Command

$PASHQ,ECP

See Also

$PASHS,ECP,ON

ECP,ON: Powering On Ports B & F, 2nd GNSS Board and Extended
Internal Memory

Function

This command is used to power on communication ports B
and F. By default, ports B and F are on.