Spectra Precision ProFlex 800 Reference Manual - Manual (Page 366)

352
Set Command Library
Example
Creating the “NAN2” mount point for an NTRIP server
delivering RTCM3.0 data, messages 1014 and 1012:
$PASHS,CST,MTP,ADD,NAN2,Nantes LF2,RTCMV3.0,“1004(1s), 1012(1s),
1006(13s)”,FRA,47.17,1.00,N*7A
Relevant Query
Command
$PASHQ,PAR,CST
See Also $PASHS,CST,PAR
$PASHS,CST
$PASHS,CST,MTP,DEL
CST,MTP,DEL: Deleting a Mount Point
Function This command is used to delete a mount point from the
embedded NTRIP caster source table.
Command Format Syntax
$PASHS,CST,MTP,DEL,s1[*cc]
s3
Format of the data available through
the mount point (ATOM, RTCM, etc.) 100 characters
max.
-
s4
Details of the data format (message
types, etc.). Comma symbols may be
entered as delimiters provided quota-
tion marks are used to encompass the
whole string (see example below). The
semicolon character is not allowed in
the string.
100 characters
max
-
s5 Country code. 3 characters FRA
f6
Latitude, in degrees, with two decimal
places.
±90.00 0.00
f7
Longitude, in degrees, with two deci-
mal places.
±180.00 0.00
s8
Fee indicator:
• Y: Use of the mount point is subject
to a fee.
• N: Use of the mount point is free.
Y, N N
*cc Optional checksum *00-*FF
Parameter Description Range Default