Pwr,off: powering off the receiver, Function, Command format – Spectra Precision ProFlex 800 Reference Manual User Manual

Page 439: Relevant query command, Pwr,par: power management

425

Set Command Library

PWR,OFF: Powering Off the Receiver

Function

This command is used to power off the receiver.

Command Format

Syntax

$PASHS,PWR,OFF[*cc]

Parameters

None.

Example

Turning off the receiver:

$PASHS,PWR,OFF*43

Relevant Query

Command

None.

PWR,PAR: Power Management

Function

This command is used to set the voltage thresholds triggering
low-power alarms and to set the lower and upper limits of
power voltage for which the receiver will be powered on or off
automatically if the DC voltage applied to the external power
input is respectively within or out of these limits (making this
second function operational requires that the slide switch
located at the bottom of the compartment be pushed to the
right).

Command Format

Syntax

$PASHS,PWR,PAR,f1,f2[,[f3],[f4]][*cc]