Spectra Precision ProFlex 800 Reference Manual - Manual (Page 120)

106
Web Server Help Files Collection
six tabs: Status, GPS, GLONASS, GALILEO, SBAS, QZSS and
Polar View.
Status:
For each visible satellite of each constellation received (GPS,
GLONASS, GALILEO, SBAS and QZSS):
Parameter Designation $PASHQ
GPS
Indicates whether the receiver has the GPS
reception capability (On) or not (Off).
GPS
GLONASS
Indicates whether the receiver has the GLON-
ASS reception capability (On) or not (Off).
GLO
GALILEO
Indicates whether the receiver has the GALI-
LEO reception capability (On) or not (Off).
GAL
SBAS
Indicates whether the receiver has the SBAS
reception capability (On) or not (Off).
SBA
QZSS
Indicates whether the receiver has the QZSS
reception capability (On) or not (Off)
QZS
Recording and
Output Elevation
Mask
Gives the current value of elevation angle used
in the data recording and output process.
ELM
Position Elevation
Mask Gives the current value of elevation angle used
in the position computation process.
PEM
Parameter Designation $PASHQ
ID Satellite ID number. SAT
Status
Gives status information for each satellite:
• Used: Satellite received and used. You may
read “Used - SBAScorr”, “Used -
DGPScorr”, “Used - L1RTKcorr” or “Used -
L1L2RTKcorr” depending on which type of
corrections are available for the satellite.
• Tracked: Satellite received but not used.
• Blank: Satellite in view.
• No ephemeris: Satellite does not provide
ephemeris data.
• Unhealthy: Satellite declared unhealthy.
• Bad URA: Bad user range accuracy.
SAT
Azimuth Azimuth angle, in degrees, of the satellite. SAT
Elevation Elevation angle, in degrees, of the satellite. SAT
SNR (dB.Hz)
Signal-noise ratios, in dB.Hz:
- For L1C, L1P(Y), L2CS, LP2(Y) and L5 sig-
nals (GPS)
- For L1C and L2C signals (GLONASS)
- For E1 and E5a signals (GALILEO)
- For L1C signal (SBAS)
- For L1C, L2CS and L5 (QZSS)
SAT