Spectra Precision ProFlex 800 Reference Manual - Manual (Page 540)

526
Query Command Library
CPD,NET: RTK Network Operation Mode
Function This command is used to read the current setting of the RTK
network operation mode.
Command Format Syntax
$PASHQ,CPD,NET[*cc]
Response Format Syntax
$PASHR,CPD,NET,d1,d2*cc
Parameters
Example
$PASHQ,CPD,NET
$PASHR,CPD,NET,1,0*51
The response line reports that the receiver will process
network corrections, if available and healthy.
Relevant Set
Command
$PASHS,CPD,NET
See also $PASHQ,CPD
Parameter Description Range
d1
RTK network operating mode relative to GPS correc-
tions (default: 1):
• 0: GPS corrections from network are not used.
• 1: FKP/MAC GPS corrections from network are
used when available and healthy, otherwise they
are rejected.
0-1
d2
RTK network operating mode relative to GLONASS
corrections (default: 1):
• 0: GLONASS corrections from network are not
used.
• 1: FKP/MAC GLONASS corrections from network
are used when available and healthy, otherwise
they are rejected.
0-1
*cc Checksum *00-*FF