beautypg.com

Real-time performance, Post-processing accuracy, Data logging characteristics – Spectra Precision ProFlex 800 Reference Manual User Manual

Page 42

background image

28

Receiver Description

• Horizontal < 50 cm

DGPS

• Horizontal < 25 cm+1ppm in typical conditions

1

Flying RTK™

• 5 cm + 1 ppm (steady state) horizontal for baselines up to

1000 km (3).

RTK

• Horizontal: 1 cm + 1 ppm (3)

• Vertical: 2 cm + 1 ppm (3)

Real-Time

Performance

Instant-RTK® Initialization:

• Typically 2-second initialization for baselines < 20 km

• Up to 99.9% reliability

RTK initialization range:

• > 40 km

Post-Processing

Accuracy

All mentioned values are RMS. See also notes (2) and (3).

Static, Rapid Static:

• Horizontal: 5 mm (0.016 ft) + 0.5 ppm

• Vertical: 10 mm (0.033 ft) + 0.5 ppm

Long Static

2

:

• Horizontal: 3 mm (0.009 ft) + 0.5 ppm

• Vertical: 6 mm (0.019 ft) + 0.5 ppm

Post-Processed Kinematic:

• Horizontal: 10 mm (0.033 ft) + 1.0 ppm

• Vertical: 20 mm (0.065 ft) + 1.0 ppm

Data Logging

Characteristics

Recording Interval

• 0.05 to 999 seconds

Memory

• 128-MByte internal memory (expandable through USB

sticks or external hard drives), 96 Mbytes usable.

• Built-in additional 8-GByte memory extension (for CORS

configuration)

1.Performance values assume minimum of five satellites, following the procedures recommended in this
manual. High multipath areas, high PDOP values and periods of severe atmospheric conditions may degrade
performance.

2.Long baselines, long occupations, precise ephemeris used.