Spectra Precision ProFlex 800 Reference Manual - Manual (Page 113)

99
Web Server Help Files Collection
• Degrees (Deg.)
• Degrees, minutes (Deg. Min.)
• Degrees, minutes, seconds (Deg. Min. Sec.)
The format of latitude and longitude depends on the chosen
angle unit. The corresponding formats are described in the
table below.
Where:
• N for North, S for South; E for East, W for West
• “D..” for degree digits, “M..” for minute digits, “S..” for
second digits
When typing in a latitude or longitude, leading and trailing
zeroes can be omitted. Degree (°), minute (’) and second (”)
symbols can be omitted as well.
For example, typing 5 6.45 N is a valid entry for 5°
06.450000’ N.
If you use the “Deg.” angle unit, you can use signs for
directions:
• “-” sign for South (S) or West (W)
• No sign or “+” sign for North (N) or East (E)
Time Units Time is always expressed in 24-hour format. You can choose
between the following two options:
• UTC: UTC time provided by the receiver.
• Local: Local time derived from the UTC time provided by
the receiver, taking into account the time zone read from
the computer’s regional settings.
Status Tab
Reading the Status
Pages
Please read below the general instructions and notes about
the
Status tab:
Angle Unit
Used
Latitude Format Longitude Format
Deg.
DD.DDDDDDDD° N or
DD.DDDDDDDD° S DDD.DDDDDDDD° E or
DDD.DDDDDDDD° W
Deg. Min.
DD°MM.MMMMMM’ N or
DD°MM.MMMMMM’ S DDD°MM.MMMMMM’ E or
DDD°MM.MMMMMM’ W
Deg. Min.
Sec. DD°MM’ SS.SSSSS” N or
DD°MM’ SS.SSSSS” S DDD°MM’ SS.SSSSS” E or
DDD°MM’ SS.SSSSS” W