Spectra Precision ProFlex 800 Reference Manual - Manual (Page 362)

348
Set Command Library
CPD,NET: Network Corrections
Function This command sets the behavior of the receiver with relation
to network corrections, i.e. RTK correction data delivered by
a network.
Command Format Syntax
$PASHS,CPD,NET,d1[,d2][*cc]
Parameters
Example
Setting the receiver to process GPS and GLONASS network
corrections:
$PASHS,CPD,NET,1,1*51
Relevant Query
Command
$PASHQ,CPD,NET
Parameter Description Range Default
d1
RTK network operating mode relative to
GPS corrections:
• 0: GPS corrections from network are not
used.
• 1: FKP/MAC GPS corrections from net-
work are used when available and
healthy, otherwise they are rejected.
0-1 1
d2
RTK network operating mode relative to
GLONASS corrections:
• 0: GLONASS corrections from network
are not used.
• 1: FKP/MAC GLONASS corrections from
network are used when available and
healthy, otherwise they are rejected.
0-1 1
*cc Optional checksum *00-*FF