Spectra Precision ProFlex 800 Reference Manual - Manual (Page 221)

207
Web Server Help Files Collection
Changing a user password should be a well-considered
action. Users should be informed in advance of the planned
changes.
RTC Bridge The RTC Bridge page is used to configure the RTC Bridge
function in a rover. The RTC Bridge function uses an external
radio transmitter connected to the rover via one of the
receiver’s serial port to transmit RTK corrections to other
rovers operated on the same site.
RTC Bridge Control:
Input Port:
Output Port:
Users list
Lists the names of the users currently
authorized to use the embedded FTP
server.
Parameter Designation $PASHS
Parameter Designation $PASHS
Mode Use this field to enable or disable RTC Bridge. BRD
Parameter Designation $PASHS
Use Data for PVT
Computation
Check this button to allow the receiver to use
the RTK corrections received on the input port
(see below) in its position computation.
BRD
Port
Specify the input port receiving RTK correc-
tions: Ethernet (P) or modem (E).
BRD
Parameter Designation $PASHS
Serial Port
Specify the port forwarding the RTK corrections
to the external radio transmitter (A, B or F)
BRD