Spectra Precision ProFlex 800 Reference Manual - Manual (Page 182)

168
Web Server Help Files Collection
Ethernet Port This page is used to set the receiver’s Ethernet port.
Ethernet:
Current
Power
For ADL Vantage/Vantage Pro only. Choose the
radiated power at the antenna output. Until you
have clicked Load Radio Settings, this field only
shows four dashes (“----”). After the radio settings
have been loaded, you may be given the possibility
to choose from several power values.
RDP,PAR
Parameter Designation $PASHS
Parameter Designation $PASHS
MAC Address
A read-only parameter providing the hardware
identification of the Ethernet port.
-
DHCP
Enable this option to let the local network
allocate a dynamic IP address to the receiver. If
disabled, a static IP address needs to be
allotted to the receiver.
ETH,PAR
IP Address
(If DHCP option cleared) Static IP address
assigned to the receiver.
ETH,PAR
Subnetwork Mask
(If DHCP option cleared) Subnetwork mask
associated to the static IP address.
ETH,PAR
Gateway
(If DHCP option cleared) Gateway associated
to the static IP address.
ETH,PAR
DNS 1 IP Address
Enter the first IP address of the DNS providing
the correspondence between the receiver
server name and its IP address.
ETH,PAR
DNS 2 IP Address
Enter the second IP address of the DNS
providing the correspondence between the
receiver server name and its IP address.
ETH,PAR