Relevant query command, See also, Rdp,typ: defining the type of radio used – Spectra Precision ProFlex 800 Reference Manual User Manual

Page 453: Function, Command format

Text mode
Original mode

439

Set Command Library

Examples

Setting the internal Pac Crest radio receiver:

$PASHS,RDP,PAR,D,PDL,2,AUT,0,9600,LOW,0,0*75

Setting the internal U-Link Rx:

$PASHS,RDP,PAR,D,MDL,0,AUT,0,9600,LOW*6A

Setting the external U-Link TRx:

$PASHS,RDP,PAR,A,MGL,1*46

Relevant Query

Command

$PASHQ,RDP,PAR

See also

$PASHS,RDP,ON

$PASHS,RDP,OFF

$PASHS,RDP,TYP

$PASHQ,RDP, CHT

RDP,TYP: Defining the Type of Radio Used

Function

This command is used to set manually the type of radio
connected to the specified port. Normally, the type of internal
radio (typically connected to port D) is detected
automatically.

Command Format

Syntax

$PASHS,RDP,TYP,c1,s2[*cc]

869.600 (manufacturer’s channel 85)

Channel Number

Frequency (MHz)