Wak: acknowledging alarms, Function, Command format – Spectra Precision ProFlex 800 Reference Manual User Manual

Page 509: Relevant query command, Web,own: setting owner information

495

Set Command Library

This mode delivers the best possible estimates in terms of
accuracy. Estimates may however be affected if the data
link experiences delays or outages.

Example

Enabling Fast output mode:

$PASHS,VEC,FST*48

WAK: Acknowledging Alarms

Function

This command is used to acknowledge all alarms. This will
also turn off the beeper (if previously set to beep on
occurrence of an alarm). After sending the command, all
alarms will switch from the “current” to the acknowledged
(“pending”) status.

Command Format

Syntax

$PASHS,WAK[*cc]

Parameters

None.

Example

Acknowledging all alarms:

$PASHS,WAK*28

Relevant Query

Command

$PASHQ,WARN

WEB,OWN: Setting Owner Information

Function

This command is used to define the owner information
displayed on the home page of the Web Server.

Command Format

Syntax

$PASHS,WEB,OWN,s1,s2,s3,s4[*cc]