Spectra Precision ProFlex 800 Reference Manual - Manual (Page 593)

579
Query Command Library
Example $PASHQ,MDM,STS
$PASHR,MDM,STS,INIT,"Orange F",2G,60*77
See Also $PASHQ,MDM
MDP: Port A Setting
Function This command is used to read the current setting of port A.
Command Format Syntax
$PASHQ,MDP[*cc]
Response Format Syntax
$PASHR,MDP,A,s*cc
Parameters
Example
$PASHQ,MDP
$PASHR,MDP,A,RS232*5E
Relevant Set
Command
$PASHS,MDP
See also $PASHQ,CTS
d4
Signal level.
“-1” means the indication of signal
level is not available.
-1; 0-100
*cc Optional checksum *00-*FF
Parameter Description Range
Parameter Description Range
s Current port setting (RS232 or RS422) 232, 422
*cc Checksum *00-*FF