Spectra Precision ProFlex 800 Reference Manual - Manual (Page 337)

323
Set Command Library
Example
Enabling ATOM message type PVT on serial port A at a 1-
second output rate:
$PASHS,ATM,PVT,A,ON,1*0E
Relevant Query
Commands
$PASHQ,ATO
$PASHQ,ATM
See also $PASHS,ATM,PER
$PASHS,ATM,ALL
ATM,ALL: Disabling All ATOM Messages
Function This command disables all ATOM messages currently enabled
on the specified port.
Command Format Syntax
$PASHS,ATM,ALL,c1,OFF[*cc]
Parameters
Example
Disabling all ATOM messages on port A:
$PASHS,ATM,ALL,A,OFF*4E
Relevant Query
Command
None.
See also $PASHS,ATM
Parameter Description Range
c1
Port related to the ATOM message(s) you want
to disable.
• A, B, F: Serial port
• C: Bluetooth port
• I, I1-I9: Ethernet port
• E: Modem
• M, U: Internal memory (M), USB key (U)
• R: Data recording through session
A, B, C, E, F, I,
M, U, I1-I9, R
*cc Optional checksum *00-*FF