Ddn,set: sending the ip address manually to dyndns, Function, Command format – Spectra Precision ProFlex 800 Reference Manual User Manual

Page 376: Relevant query commands, See also, Dip: server connection

362

Set Command Library

DDN,SET: Sending the IP Address Manually to DynDNS

Function

This command is used to force the receiver to send right away
its IP address to the DynDNS service. Typically this command
may be used when you have noticed that the ISP has just
changed the (public) IP address of the receiver. By default,
the IP address is sent to the DynDNS server every 10
minutes.

Command Format

Syntax

$PASHS,DDN,SET[*cc]

Parameters

None.

Example

Sending immediately the IP address to the DynDNS service:

$PASHS,DDN,SET*55

Relevant Query

Commands

$PASHQ,DDN

$PASHQ,PAR

See Also

$PASHS,DDN,PAR

$PASHS,ETH,PAR

DIP: Server Connection

Function

This command is used to connect the receiver to a base via
the base’s IP address or host name.

Command Format

Syntax

$PASHS,DIP,RIP,s1,PRT,d2[,LGN,s3,PWD,s4][,IPP,c5][*cc]