Spectra Precision ProFlex 800 Reference Manual - Manual (Page 520)

506
Query Command Library
ANP,OWN: Local Antenna Used
Function This command returns the name of the GNSS antenna
currently used by the receiver.
Command Format Syntax
$PASHQ,ANP,OWN[*cc]
Parameters
None.
Response Format Syntax
$PASHR,ANP,OWN,s1,s2,s3*cc
Parameters
Example $PASHQ,ANP,OWN
$PASHR,ANP,OWN,ASH111661,,*27
Relevant Set
Command
$PASHS,ANP,OWN
ANP,REF: Antenna Used at the Base
Function This command returns the name of the GNSS antenna
assumed to be used by the base currently sending data to the
interrogated receiver (a rover).
Command Format Syntax
$PASHQ,ANP,REF[*cc]
Parameters
None.
Parameter Description Range
s1 Name of the local antenna 31 characters max.
s2 Antenna serial number 31 characters max.
Antenna setup ID 0-255
*cc Checksum *00-*FF